Defiant Encore 0028/2140 Assembly Service Manual
General:
All parts were carefully inspected and cleaned to bare metal or replaced
during the disassembly process. Assembly may now begin. To achieve a
properly functioning, air tight stove, 6 each, 11 oz. tubes of thermocement,
part number 120-6125 are required. Cut the thermocement tube tips so
that a ¼”- 3/8” unbroken bead of thermocement may be applied to the
cement channels, flanges and/or flat mating surfaces.
*NOTE:
Cement is indicated by the shaded area in the “C” series illustrations.
**Caution
Pay strict attention to the type, size and number of fasteners called for in
the exploded view drawings, parts list and text.
STEP 1:
Place the stove bottom upside down on a flat surface. Install 4 each, hex
head leveler bolts (¼” -20x1”) in the 4 stove legs, finger tight. Install the
4 legs on the stove bottom using 4 each hex head bolts (3/8”-16x1-¼”) and
4 each, standard flat washers (3/8”). Place the stove handle holder
between the flat washer and the bolt head on the left front leg (right front
leg when the bottom is turned over to its normal position).
STEP 2:
Assemble the two piece half hinge using 2 each, hex head cap screws (¼-
20 ¾”) and 2 each, standard flat washers (¼”) finger tight. Install the two
piece half hinge on the ash drop, clevis facing the door opening with 3
each, hex head cap screws (¼-20x ¾”) and 3 each, standard flat washers
(¼”) finger tight.
STEP 3:
Cement the stove bottom at points indicated in Figure C-1. Place the ash
drop on the stove bottom and secure with 4 hex head cap screws (¼-20 x
¾”) and 4 each, standard flat washers (¼”).
Fig. C-1
Bottom (bottom view)
