Vermes MDS 3000 Series, User Manual

Page: 39 / 77

VTK ‐ VS ‐ BA ‐ 004e ‐ B | User Manual MDS 3200A
| Communication Interfaces
39
7.1.2 RS ‐ 232C Commands
The available commands are listed below. They are explained on the following pages, to ‐
gether with short examples.
Each single instruction can be tested, e.g. by means of the “MDC Communicator“ software.
This software is contained on the CD which is included in the delivery. Information about
handling and installation of this software package can be found in chapter 7.1.3 (see page
50) .
RS ‐ 232C Commands
Reaction Time
1. *ESR?
450 ms
2. *IDN?
250 ms
3. ADJUST:?
250 ms
4. ADJUST:START
750 ms
5. HEATER:1:OFF
250 ms
6. HEATER:1:ON
250 ms
7. KEY:ENTER?
250 ms
8. KEY:ESCAPE?
250 ms
9. LCD?
250 ms
10. SYSTEM:KLOCK:OFF
250 ms
11. SYSTEM:KLOCK:ON
250 ms
12. TEMP:?
250 ms
13. TEMP:<setpoint in °C>
250 ms
14. MAINT:STATUS
250 ms
15. TRIGGER:SET:?
250 ms
16. TRIGGER:ASET:?
250 ms
17. TRIGGER:SET:<Rising>,<Open Time>,<Falling>,<Needle Lift>,<Number of Pulses>, <Delay>
250 ms
18. TRIGGER:SET:<Rising>,<Open Time>,<Falling>,<Needle Lift>,<Number of Pulses>, <Delay>,1
1150 ms
19. TRIGGER:ASET:<Rising>,<Open Time>,<Falling>,<Needle Lift>,<Number of Pulses>, <Delay>
250 ms
20. TRIGGER:ASET:<Rising>,<Open Time>,<Falling>,<Needle Lift>,<Number of Pulses>, <Delay>,1
1150 ms
21. VALVE:OPEN
250 ms
22. VALVE AOPEN:
250 ms
23. VALVE:OPEN:<Rising>,<Open Time>,<Falling>,<Needle Lift>,<Number of Pulses>, <Delay>
250 ms
24. VALVE:AOPEN:<Rising>,<Open Time>,<Falling>,<Needle Lift>,<Number of Pulses>, <Delay>
250 ms
25. VALVE:UP
250 ms
26. VALVE:DOWN
250 ms
27. WRITE:LCD:<text>
250 ms
28. SYSTEM:SHOW:CYCLES
250 ms
29. SYSTEM:SHOW:VALVEID
250 ms
30. SYSTEM:SHOW:CONTROLLERID
250 ms
31. *OPC?
250 ms
32. TAPPET:CLEAR
450 ms
33. TAPPET:SET:?
450 ms
34. NOZZLE:SET:?
450 ms
35. NOZZLE:CLEAR
450 ms
36. SYSTEM:SHOW:ACTORTEMP
250 ms
37. HELP
250 ms