VERITAS Access 3340 Command Reference Manual Download Page 41

Page: 41 / 110

Network > IPv6

Network > IPv6

– Add an IPv6 address without specifying a gateway address.

SYNOPSIS

IPv6

IPAddress Prefix

[InterfaceNames]

DESCRIPTION

Use this command to configure the IPv6 address of a network interface. You cannot
use this command to configure multiple interfaces.

OPTIONS

IPv6

IPAddressPrefix

[InterfaceNames]

Change the IPv6 address of a network interface.

Where

IPAddress

is the IPv6 address,

Prefix

is the prefix length, and

[InterfaceNames] is the name of the device.

The [InterfaceNames] parameter is a comma-separated list of interface names.
The [InterfaceNames] parameter is an optional field. If an interface name is
not provided, the command searches for an interface and configures it.

EXAMPLES

Use the following example to assign an IPv6 address to a specific interface:

IPv6 9ffe::9 64 eth1

Main > Network

Network > IPv6

Summary of Contents for Access 3340















































































































Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands

VERITAS Access 3340, Command Reference Manual

Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands