VERITAS Access 3340, Command Reference Manual

Page: 40 / 110

Network > IPv4
Network > IPv4
– Change the IPv4 address of a network interface.
SYNOPSIS
IPv4 IPAddress NetMask [InterfaceNames]
DESCRIPTION
Use this command to change the IPv4 address of a network interface. You can use
this command to configure multiple network interfaces. To do that, you must repeat
the command for each network that you want to add.
OPTIONS
IPv4 IPAddress NetMask [InterfaceNames]
Change the IPv4 address of a network interface.
Where IPAddress is the name of the new IPv4 address. The NetMask variable
is the name of the netmask. The [InterfaceNames] parameter is a
comma-separated list of interface names. The [InterfaceNames] field is optional.
If an interface name is not provided, the command searches for an interface
and configures it.
40 Main > Network
Network > IPv4