VERITAS Access 3340 Command Reference Manual Download Page 102

Page: 102 / 110

After you respond to these questions, the following summary information
displays:

-------------------------------------

Review factory reset selections

-------------------------------------

Reset OS and software configuration:

[Required]

Reset networking configuration:

[Yes]

Reset storage configuration (remove data):

[No]

Automatic restart:

[Yes]

Factory reset makes the following version changes to the node:

+------------------------------------------------------+

Current Version

Reverted Version

+---------------------------+--------------------------+

Access 7.3.1

Appliance 7.3.1

+------------------------------------------------------+

The following warning appears. If you want to begin the factory reset operation,
enter

yes

>> WARNING: The node is ready for factory reset. This process

cannot be reversed! Do you want to proceed? [yes, no] (no) yes

The following summary messages appear as the factory reset continues:

-[Info] Running factory reset. This process can take up to 20 minutes...

-[Info] The appliance is restarting...

102

Main > Support

Support > FactoryReset

Summary of Contents for Access 3340















































































































Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands

VERITAS Access 3340, Command Reference Manual

Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands