VERITAS Access 3340 Command Reference Manual Download Page 98

Page: 98 / 110

Support > FactoryReset

Support > FactoryReset

– Reset the node to factory default settings.

SYNOPSIS

FactoryReset

FctoryReset ResetAll

DESCRIPTION

This command exists under the

Main_Menu > Support

view. You can use this

command to reset the current node to the factory default settings. If you have
changed the initial password to something else and you run this command, your
password is reset to the initial default value.

Note:

This command only applies to the current single node. If you want to reset

the entire cluster, you must reset each node in the cluster one at a time. For more
information, see the

Veritas Access™ Appliance Getting Started Guide

OPTIONS

FactoryReset

Use this command to reset the node to the factory default settings.

FactoryReset ResetAll

Use this command to reset the node factory installed image in non-interactive
mode.

EXAMPLES

The following is an example output when you run the FactoryReset command.

Main > Support

Support > FactoryReset

Summary of Contents for Access 3340















































































































Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands

VERITAS Access 3340, Command Reference Manual

Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands