VERITAS Access 3340 Command Reference Manual Download Page 103

Page: 103 / 110

Support > InfraServices

Support > InfraServices

– Display and control the infrastructure services.

SYNOPSIS

Show All

Start All

Stop All

Show Database

Start Database

Stop Database

Show MessageQueue

Start MessageQueue

Stop MessageQueue

Show Webserver

Start Webserver

Stop Webserver

DESCRIPTION

These commands exist under the

Main > Support > InfraServices

view. You

can use these commands to monitor, start, and stop the infrastructure services.

Note:

The infrastructure service commands are mainly used for troubleshooting

and support. These should be used under the guidance of Technical Support.
Stopping the infrastructure services may lead to failure of running operations.

OPTIONS

Show All

Show the status of all the infrastructure services. The infrastructure services
include the database, message queue, and the web server service.

103

Main > Support

Support > InfraServices

Summary of Contents for Access 3340















































































































Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands

VERITAS Access 3340, Command Reference Manual

Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands