VERITAS Access 3340, Command Reference Manual

Page: 92 / 110

directories, the same commands that were available under the
LOGROOT/
view
are available for each of the log directories.
For example, to see the operating system (OS) log files, you must first enter
cd
OS
at the
LOGROOT/>
command prompt. The command prompt changes to
LOGROOT/OS>/
. Then you can enter
ls
to see the file names. Finally, you can
use the
less filename
command to view a read-only version of the log file.
■
Export or remove CIFS and NFS shares for the logs.
Use the
Share Open
command to export the CIFS and the NFS shares for the
logs. The
Share Close
command removes the CIFS and the NFS shares for
the logs.
■
Display debug information from the VxLog files.
Use the
VxLogView
command to display log files for specific job or by a set
duration of time.
OPTIONS
Browse
Use the show the appliance logs on the current node.
Share
Use to extract the CIFS and the NFS shares for the logs.
For CIFS, you must map the share using the appliance "admin" user's
credentials.
VxLogView Minutes minutes_ago
Display debug information from the log files using time (in minutes) as the
criteria by which the information is parsed.
Where minutes_ago is the amount of time, in minutes, used to determine how
much of the past debug information to display.
VxLogView Module
Use the command to display debug information from the log files by designating
a specific logging module as the criteria by which the information is parsed.
Type the number that corresponds to the appliance system component that
contains the module that you want to view the VxLog of.
92 Main > Support
Support > Logs