VERITAS Access 3340, Command Reference Manual

Page: 42 / 110

Network > SetProperty
Network > SetProperty
– Set the Ethernet interface property.
SYNOPSIS
SetProperty InterfaceName Property Value
DESCRIPTION
You can use this command to set Ethernet interface property. You can define the
name of the device, the property name such as an MTU. And you can define the
property value, such as 1500 for the MTU.
OPTIONS
SetProperty InterfaceName Property Value
Set Ethernet interface property.
Enter the name of the interface name in the InterfaceName variable. An example
of this value is eth1 . The Property variable is the property name, such as mtu .
The Value variable is the property value, for example 1500.
The following is sample entry for this command:
SetProperty eth1 mtu 1500
This command changes the Maximum transmission unit (MTU) of interface
(eth1) to 1500.
42 Main > Network
Network > SetProperty