OPTIONS
SNMP Disable
Disables the ability to send SNMP notifications (traps) for monitoring.
SNMP Enable
Enable the ability to send SNMP notifications (traps) for monitoring.
SNMP Set
Server
[Community] [Port]
Add information about SNMP. Here,
Server
is the name of the SNMP server,
[Community] is the SNMP community, and [Port] is the SNMP port.
Note:
The Product Long Name supports all the SNMP servers in the market.
However, the ManageEngine™ SNMP server and the HP OpenView SNMP
server are tested and certified.
SNMP Show
Displays the parameters that are set after you have run an
SNMP Set
Server
command. If you run this command before you have run a
SNMP Set
Server
command, then default values for [Community] and [Port] are displayed and
no value is displayed for
Server
.
SNMP ShowMIB
Display the contents of the Management Information Base (MIB) file. This file
contains the notification traps that are configured to monitor the appliance.
EXAMPLES
You can use either of the following methods to configure a public SNMP community
on port 8080. The example uses the [Community] and [Port] options.
abc123.Alerts> SNMP Set pqr222.xyz.com public 8080
Successfully set SNMP manager
When you run the
Settings> Alerts > SNMP ShowMIB
command, an output similar
to the following is displayed.
VERITAS-APPLIANCE-MONITORING-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString, mib-2 FROM RFC1213-MIB
enterprises, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI;
applianceMonitoringMib MODULE-IDENTITY
79
Main > Settings
Settings > Alerts > SNMP
Summary of Contents for Access 3340
Page 1: ...Veritas Access Appliance Commands Reference Guide 7 3 2 Revision 2 ...
Page 11: ...Main Appliance This appendix includes the following topics Appliance Status A Appendix ...
Page 13: ...Main Manage Cluster This appendix includes the following topics Cluster Configure B Appendix ...
Page 56: ... yes no yes Info The default proxy server is unset successfully 56 Main Network Network Proxy ...
