Ruffling
Note:
− When sewing with the pleater foot, only use the straight stitch 01 with the
needle position «3.5» in the middle! It is possible that the needle could hit
the presser foot and break when other patterns are used
1. Remove the presser foot holder and insert the pleater
2. Sow one or several lines of straight stitches
3. If tighter pleats are required, reduce the tension of the upper thread and
set to below «2» so that the bobbin thread lies on the reverse if the garment
4. Pull the lower threads until the required quantity and/or density of pleats
is achieved. Then tie the threads.
5. Iron the pleats flat
Notas:
− You can also use the universal foot and then pleat by hand. First set the
thread tension to below «2» and then pleat the material by pulling the
bobbin thread
– After pleating, return the thread tension to the normal setting of «4»
Veritas
9000A5
Sewing
46
