Straight stitches, zigzag stitches and needle positions
Changing the needle position
These settings apply only to patterns 01-05. The pre-set position is “3.5”,
centre position. When you press the key «–», the needle position will move
to the left. When you press the key«+», the needle position will move to the
right. On the LCD screen, the point illustration and the number indicate the
needle position.
Changing the stitch length
To shorten the stitch length, press the key «
–
»; press the key «
+
» to increase
the stitch length. For sewing on very fine fabric with a longer stitch length
Setting the stitch width
The maximum zigzag stitch width for zigzag stitching is “7.0”; however,
the width can be reduced on any stitch patterns. The width increases as
you press the zigzag key «
+
» (from “0.0-7.0”).
Note:
− When sewing with twin needles, never set the stitch width to be wider
than «3.5»!
Setting the stitch length
The stitch density of zigzag stitches increases the closer the stitch length
is set to «0.2».
Beautiful zigzag stitch patterns can be achieved with a stitch length in the
range of «1.0» – «2.5».
Very tight zigzag stitching (close to each other) is called a satin stitch
Veritas
9000A5
Veritas
9000A5
Sewing
28
