– Press the -key to enter the memory mode; and appear in the display
Saving stitches
The machine has a program memory that can retain stitch patterns, letters and numbers. This means that
whole names can be sewn simply in one go using patterns. Up to 30 stitches can be stored. Since stored
patterns are not lost after the sewing machine is turned off, they can be recalled at any time.
It is also possible to store the stitch length/width and mirror function per stitch (except for letters and
numbers).
With the exception of the -stitches and the buttonholes, all stitch patterns , letters and
numbers can be stored in any sequence.
Programming
– When the sewing machine is switched on (set the main power switch to «I»), the word and the
stitch number «1» will appear on the LCD screen
M
– Press the -key to switch at any time between the (stitches 01 - 60) and (letters/
numbers)
– Choose the desired stitch, e.g. «
15
». This is automatically saved and the display will show a small line
marking for each saved stitch.
In the case of the stitches 1 - 16 and 30 – 60, it is also possible to select the stitch width/length or a
mirror function (see also page 23). These settings are automatically saved as well.
– Repeat this process for further stitches (max. 30 stitches can be saved)
– The programmed stitches can be checked using the keys
Corrections
– Wrongly programmed stitches can be deleted using the key
– Stitch width/length can also be changed at a later date
– Additional stitches can also be added. Use the keys to page to the position AFTER which
a stitch should be added.
Example: You want to add the Stitch «60» after the programmed stitch «14». Page to stitch «14» and
then enter stitch «60»
C
Saving
– Save the programming using the key . Even when the machine is switched off, the stitches will
remain saved and the machine returns to the -mode (the display will go out)
M
Saved
stitches
Stitch number
Veritas
9000A5
Memory
24
