– Press the -key to enter the memory mode ( and appear in the display)
– Keep pressing the key until all line markings and all numbers in the display disappear
– The memory mode is quitted by pressing the -key ( and stitch number «1» appear
in the display)
Sowing with saved stitches
The stitches stored in the machine can be called up and used at the touch of a button.
– Press the -key to enter the memory mode ( and appear in the display)
M
Checking the stitches
– The programmed stitches can be checked using the keys
Starting the sewing process
– Place the fabric below the presser foot and lower the presser foot
– Press down the foot pedal to start sewing. The triangular pointer above the lined scale indicates the
status of the sewing work, i.e. it jumps from the performed stitch pattern to the next line
– Finish sewing by releasing the foot pedal. If the content of the memory should be sewn again,
keep the foot pedal pressed (the content of the memory is sewn until the foot pedal is released)
Exit the memory mode
– The memory mode is quitted by pressing the -key (the content of the memory is retained)
M
Deleting the memory
M
M
C
Veritas
9000A5
Memory
25
