Walking foot
The walking foot is an extra accessory and available separately. It is not
supplied with the sewing machine.
We recommend always sewing first without a walking foot.
It is easier to guide the fabric with a standard presser foot and the user
has a better view of the sewing area. This sewing machine supplies
excellent stitch quality on many fabrics ranging from fine chiffon to
multi-layer denim materials.
The walking foot compensates the transport of the upper and lower
layers of fabric and facilitates the exact sewing together of checks,
stripes and patterns. It also serves regular fabric transportation for
difficult fabrics.
1. Raise the presser foot lift to lift the presser foot rod
2. Remove the screws on the presser foot rod (turn anti-clockwise)
and take the presser foot holder away
3. Attach the walking foot as follows:
– Arm (a) lies over the needle clamp screw and the needle bar (b)
– Attach the holder from the left to the presser foot rod
– Lower the presser foot rod
– Tighten the screw again to the presser foot rod (clockwise)
– Ensure that both screws (on the needle and presser foot rod)
are tight again
4. Bring up the bobbin thread and pull the bobbin thread and the upper
thread behind the walking foot
Veritas
9000A5
Accessories (available separately)
52