Eyelet stitching
1. Select stitch type 28 and use the satin stitch presser foot. For belts etc.
2. Use the stitch width adjustment to select the eyelet size:
A: Large / 7.0 mm
B: Middle / 6.0 mm
C: Small / 5.0 mm
3. Lower the needle into the fabric at the beginning of the stitching, and
then lower the presser foot lever. Press the foot pedal. The machine stops
automatically at the end of the stitch
4. Make a hole in the fabric using an eyelet punch.
Note:
− If thin thread is used, the stitching may not be dense enough. If this occurs,
sew the eyelet twice, one on top of the other.
Veritas
9000A5
Sewing
36
