Button sewing
Use the button sewing foot.
1. Move the feed dog adjustment lever to « » (b) to lower the feed dog.
(Note: The stitch length cannot be adjusted as long as the feed dog is lowered.)
2. Position the fabric under the foot. Place the button in the desired position,
lower the foot on to the button.
3. Select zigzag stitch. Adjust the stitch width to “2.0-7.0” according to the
distance between the two holes of the button.
4. Turn the handwheel to check that the needle goes cleanly into the left
and right holes of the button.
5. Before sewing, press the Auto-lock button to automatically sew
reinforcement stitches at the beginning and at the end of the stitch.
So that the button has a „neck“, place a darning needle on the button
and then sew.
6. For buttons with 4 holes, sew the two front holes first, pull the fabric
forward and then sew the two holes back.
Veritas
9000A5
Sewing
32
