Viewing Information
► To view information
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > View information
.
4. Click
Log file
to view system logs.
5. Click
User information
to view information about the users.
6. Click
Parameters
to view information about the current settings of the
IP camera.
7. Click
Access list
to view access information.
Performing a Factory Default
The IP camera comes with the following factory default values:
IP Address: DHCP enabled. If the DHCP configuration fails, the IP camera
assigns itself a temporary APIPA address: 169.254.X.Y. (where X and Y are
based on the last two octets of the MAC Address.
Username and Password:
admin
► To perform a factory default
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Maintenance
.
4. From the
Factory Default
section, click one of the following:
Full Restore
: To completely restore to the factory default settings.
Partial Restore
: keeps network configuration.
Note
Click
Reboot
to restart the IP camera without changing current settings.
Viewing Information
53
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
