Speaker
: Click
Speaker
to mute / activate the audio.
Note
This function is only available for users who have been granted this
privilege by the administrator.
Video Streaming Pause / Restart
: Click
Stop
to disable video
streaming, the live video will be displayed as black. Press
restart
to show
the live video again.
Configuring the General Settings
► To configure the general settings
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System
.
4. In the
Host Name
box, type a descriptive name for the device.
5. From the
Time Zone
list, select the time zone.
6. Select
Enable daylight saving time
if the location you are in observes
DST. Set the time offset and DST duration. The format for time offset is
[hh:mm:ss].
7. In the
Time format
list, select the date format.
8. Select one of the following:
Sync with computer time
: Date and time is synchronized with a
computer.
Manually
: Enter the date and time manually.
Sync with NTP server
: Date and time is synchronized with a Network
Time Protocol (NTP) server. in the NTP server box, type the IP address
of the NTP server and select the update interval .
Note
The synchronization is performed every time the camera boots up.
9. Click
Save
.
Chapter 2: Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
24
