Configuring IEEE 802.1X
► To configure IEEE 802.1X
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Security > IEEE 802.1X
.
4. For CA Certificate, click
Browse
and locate the CA Certificate.
5. Click
Upload
.
6. For Client Certificate, click
Browse
and locate the client certificate.
7. Click
Upload
.
8. For Private Key, click
Browse
and locate the private key.
9. Click
Upload
.
10. In the Settings, set the following:
1. Identity: user identity associated with the certificate.
2. Private Key Password: The user password.
11. Select
Enable IEEE 802.1X
.
12. Click
Save
.
Configuring the Network Settings
► To configure the network settings
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Network > Basic
.
4. Select one of the following:
Get IP Address automatically
Use fixed IP address
Use PPPoE
Chapter 4: Advance Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
38
