Note
For video in the web page to pass through a NAT router, RTSP over HTTP must
be set.
The OCX protocol is only applicable to stream video to the web page and not
Nextiva VMS.
Setting Video Frame Rate
► To set video frame rate
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
Video > Video Frame Rate
.
4. From the
H.264-1 or H.264-2 frame rate settings
sections, set the
frame rate to the desired value.
5. Click
Save
for each option.
Note
Lower frame rate will decrease video smoothness.
Setting the Video Mask
► To set the video mask
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
Video > Video Mask
.
4. From the
Active Mask Function
section, select the
Video Mask
to display
in the Live Video pane. Use the mouse to adjust the size and location.
5. From the
Maks Setting
section, select a color for the mask. Mask color
include red, black, white, yellow, green, blue, cyan, and magenta.
6. Click
Save
for each option.
Setting Video Frame Rate
27
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
