Performing a Firmware Upgrade
► To perform a firmware upgrade
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Maintenance
.
4. From the
Upgrade
section, perform the following:
a. From Step 1, click
Browse
and locate the firmware file to upload to the
IP camera.
Caution
Do not change the file name, or the IP camera will not find the file.
b. From Step 2, select the firmware file (4320_FW_xx_yy) to install.
c. From Step 3, click
Upgrade
.
Exporting or Uploading Configuration Files
Users can export configuration files to a specified location and retrieve data by
uploading an existing configuration file to the IP Camera.
► To export or upload configuration files
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Maintenance
.
4. From the
Maintenance
section, perform one the following:
Click
Export
to save system settings by exporting the configuration file
(.bin) to a specified location for future use.
Click
Browse
to select an existing configuration file , and then click
Upload
.
Note
The IP address is also exported. If the configuration is imported into another
camera, the camera will have the same IP address as the camera used to
export the configuration.
Chapter 4: Advance Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
54
