Configuring FTP
The Administrator can set sending alarm message to a specific File Transfer
Protocol (FTP) site when an alarm is triggered. Users can assign alarm
message to up to two FTP sites. Enter the FTP details, which include server,
server port, user name, password and remote folder, in the fields.
► To configure FTP
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > FTP
.
4. In the
1st FTP server
box, type the name of the FTP server.
5. In the
1st FTP server port
box, type the port number of the FTP server.
The default value is 21.
6. In the
1st FTP user name
box, type the user name.
7. In the
1st FTP password
box, type the password.
8. In the
1st FTP remote folder
box, type the name of the remote folder.
9. Select
1st FTP passive mode
to use passive mode.
10. In the
2nd FTP server
box, type the name of the FTP server.
11. In the
2nd FTP server port
box, type the port number of the FTP server.
The default value is 21.
12. In the
2nd FTP user name
box, type the user name.
13. In the
2nd FTP password
box, type the password.
14. In the
2nd FTP remote folder
box, type the name of the remote folder.
15. Select
2nd FTP passive mode
to use passive mode.
16. Click
Save
.
Configuing HTTP
► To configure HTTP
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > HTTP
.
4. In the
1st HTTP server
box, type the name of the HTTP server.
5. In the
1st HTTP user name
box, type the user name.
Configuring FTP
43
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
