Configuring Local Recording
In the Recording setting page, you can specify the recording schedule that fits
the present surveillance requirement.
► To configure local recording
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Recording
.
4. From the
Recording Schedule
select one of the following:
Disable
,
Always
or
Only during time frame
.
5. If you select
Only during time frame
, select the days to record, the
Start
time
and the
duration
of the recording.
6. Click
Save
.
Configuring a Schedule
This function allows the users to setup schedules for
Alarm Switch
,
Motion
Detection
and
Network Failure Detection
. You can create up to 10 sets of
time frames in the time frame list.
► To configure a schedule
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Schedule
.
4. For each set, select the days to record, the
Start time
and the
duration
of
the recording.
5. Click
Save
.
Configuring Local Recording
51
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.