1: Overview
2
Verint Video Intelligence Solutions
About the S2750e Series
The S2750e series offers many models to cover your system needs:
S2750eN—An IP camera working in the NTSC video standard
S2750eP—An IP camera working in the PAL video standard
Unless otherwise specified, the word S2750e refers to any of these devices.
Key Features
The S2750e offers the following features:
One analog video output for aiming and focusing during installation
The choice of either power over Ethernet (PoE) or 12V DC
Dual video encoding
Up to 30 frames per second with the MPEG-4 and MJPEG codecs
480 TVL, 1/3 inch Sony CCD sensor
4 to 9 mm varifocal lens, with DC auto-iris
Triple axis lens adjustments
Clear (default) or smoked cover
Integration with the Nextiva enterprise video management solution
Security
Every camera comes with a unique SSL (Secure Sockets Layer) certificate for securing its IP
link. SSL is a commonly used protocol for managing the security of IP message
transmission. If enabled, the SSL protocol secures I/O and proprietary VSIP communication
data. It does not apply to video transmission.
Frame Rate and Performance
The available video frame rates of each encoder IP camera are:
NTSC—1 to 7, 10, 15, or 30 frames per second (fps)
PAL—1 to 6, 8, 12, or 25 fps
The composite video signal of the camera is sent to two separate encoders. You can
customize each encoder to meet your system needs, for instance in terms of frame rate and
resolution. Here are typical scenarios regarding encoder use:
Scenario
Encoder 1
Encoder 2
point-to-point
point-to-point
unused
unused
point-to-point
