2: Mounting and Configuring the IP Camera
16
Verint Video Intelligence Solutions
8. Select the Units tab, then click Discover.
A device of type “Unknown” with a 169.254.X.Y IP address appears in the list; it
corresponds to your new device. This default IP address is based on the APIPA
(Automatic Private IP Addressing) addressing scheme.
X
and Y are relative to the MAC
(Media Access Control) address of the device; for more information about APIPA, see
page 52.
9. Select the unknown device, then click Configure.
10. In the Reconfigure unit? confirmation window, click Yes. The New Network
Configuration window appears.
11. If you have a DHCP (Dynamic Host Configuration Protocol) server on your network,
check Use DHCP. Otherwise, enter the IP address, subnet mask, and gateway of the
device, as provided by your network administrator. For more information about DHCP,
see page 52.
12. Click OK. The device reboots with its new network configuration.
13. In the Units tab, click Discover to update the list of devices. The new S2750e device
appears.
The S2750e initial configuration is now complete. You perform further configuration with
the web interface (see page 19) or your video management software.
