3: Using the Web Interface
42
Verint Video Intelligence Solutions
For more information about these tasks and when you should perform them, see the
“Maintaining and Troubleshooting the Device” chapter.
To reboot the device:
1. In the navigation pane, click Maintenance. The maintenance pane appears.
2. Click Reboot. A confirmation window appears.
3. Click OK.
To load the default values of the device:
1. In the navigation pane, click Maintenance. The maintenance pane appears.
2. To keep the following network parameters, ensure that Keep Network Settings is
checked:
Otherwise, you will need to reprogram the device for proper operation within the
network.
3. Click Load. A confirmation window appears.
4. Click OK. The default values are applied.
To update the firmware of the device:
1. In the navigation pane, click Maintenance. The maintenance pane appears.
DHCP usage
Gateway
Ping request target
Subnet
IP address
DNS servers
Ping request size
Host name
Note: If you upgraded the device firmware or are accessing the firmware update process
for the first time, you need to install an ActiveX prior to proceeding (for more
information, see page 20).
