Verint Nextiva S2750e Series User Manual Download Page 33 | Manualshive

Page: 33 / 74

Verint Nextiva S2750e Series User Manual Download Page 33

Verint Video Intelligence Solutions

27

Nextiva S2750e Series User Guide

Viewing the System Status

The system status information indicates the current values of internal device parameters.
These internal parameters are useful when troubleshooting the device with the assistance
of a customer service specialist.

To view the system status of the device:

1. In the navigation pane, expand Configuration, then click System Status. The system

status parameters appear.

The following information is available:

Firmware Version—The current firmware version of the main processor of the
device. The latest firmware files are available on the Verint Video Intelligence
Solutions extranet.

Loader Version—The version of the firmware used to load the device.

Booter Version—The version of the firmware used to boot the device.

PIC Firmware Version—The version of the firmware used in the PIC (programmable
intelligent controller) microcontroller.

Build Date—The date the firmware has been generated.

CPU Info—The version of the processing unit in the device.

CPU Frequency—The frequency (in Hz) of the processing unit in the device.

Uptime—The time since the device has been rebooted.

Serial Number—The serial number of the device.

CPLD Version—The version of the complex programmable logic device.

Board Version—The version of the main board in the device.

Internal Value 1—Verint technical information.

«
...
31
32
33
34
35
...
»

Summary of Contents for Nextiva S2750e Series











































































Reviews:

No comments