Verint Video Intelligence Solutions
9
Nextiva S2750e Series User Guide
3. If you are using the base cable entry, replace the plastic cap by the supplied rubber
cap, then make a hole at the desired location on the mounting surface. The size of both
cable entries is 3/4” NPT2.
4. If you are using the side cable entry on the dome base, open the desired hole on the
outer case with pliers. Insert the supplied rubber cap in the dome cable entry.
Installing the Camera
The installation process varies depending on your supply power: PoE or 12V DC.
Power-over-Ethernet (PoE) enables you to power the camera and establish its Ethernet
connection in a single operation. The optional PoE kit sold by Verint contains two items: an
injector and a power cord. The connection procedure may vary if you use another PoE kit;
refer to the PoE kit documentation for more information.
Verint also offers a universal 12V DC power supply as part of your package. For any other
power supply, refer to the manufacturer documentation for the proper wiring scheme.
To perform a 12V DC power connection with the universal power supply sold by
Verint:
1. If the electrical plug installed on the power supply is the right one for the country of
operation, go to step 4.
2. Remove the installed plug by pushing the PUSH button and keeping it pushed while
turning the plug in the counterclockwise direction.
Warning: Never use PoE and 12V DC at the same time. It may damage the device.
Note: The camera must be powered by a listed power supply that is marked “LPS,”
”Limited Power Source,” or “Class 2”.
Base cable entry
Side cable entry
0.5 inch side entry
0.75 inch side entry