Dura 65
32 | Page
Version 1.0v-05/2021
© Verder International B.V
9 List of Figures and Tables
9.1
List of Figures
Figure 1 Fastening Lifting Gear to Pump
3.1.2
Figure 2 Name plate
4.2.1
Figure 3 Layout Dura 65 (Generic View)
4.3
Figure 4 Installing the Gearbox
5.4
Figure 5 Installing the Motor
5.4
Figure 6 Shimming
5.5
Figure 7 Fitting the Inspection Window
5.6
Figure 8 Installing the Hose
5.7
Figure 9 Clamp Ring Inserted
5.8.1
Figure 10 Hose and Flange Assembly (just for information)
5.8.1
Figure 11 Lubricant Level Indicator Plate
5.8.1
Figure 12 Filling the Pump with Lubricant
5.9
Figure 13 Positioning the Breather Cap
5.9
Figure 14 Nozzle Loadings on Flanges
5.10.1
Figure 15 Clean the Pump Housing
7.2.1
Figure 16 Verderflex NBRF Food Grade Hose Identification
7.2.2
Figure 17 Drain the Lubricant
7.4
Figure 18 Close the Valve
7.4
Figure 19 Filling the Pump with Lubricant
7.4
Figure 20 Grease the Gearbox Adaptor/Bearing Carrier
7.5
Figure 21 Grease the Gearbox Adaptor/Bearing Carrier
7.6
Figure 22 Remove the lower port flange
7.6
Figure 23 Remove the O-ring and Clamp Ring
7.6
Figure 24 Removing the Inspection Window
7.7
Figure 25 Remove the Rotor Shoe
7.7
Figure 26 Position the New Rotor Shoe
7.7
Figure 27 Remove the Front Cover
7.8
Figure 28 Remove the Drive Coupling
7.8
Figure 29 Remove the Motor
7.8
Figure 30 Remove the Gearbox
7.8
Figure 31 Remove the External Circlip
7.8
Figure 32 Remove the Rotor
7.8
Figure 33 Remove the Gearbox Adaptor/Bearing Carrier
7.8
Figure 34 Replace the Rotary Lip and O-ring
7.8
Figure 35 Install the Gearbox Adaptor/Bearing Carrier
7.8
Figure 36a Install the Rotor (illustrating front of the pump)
7.8
Figure 36b Install the Rotor (illustrating back of the pump)
7.8
Figure 37 Remove the Seal Plate
7.9
Figure 38 Remove the Bearings
7.9
Figure 39 Install the Bearings
7.9
Figure 40 Install the Seal Plate
7.9
Figure 41 Install the V-Seal
7.9
