Verathon BladderScan i10 Operation & Maintenance Manual Download

Page: 72 / 96

0900‑5005 REV‑00

HELP & TROUBLESHOOTING

HELP RESOURCES

PROCEDURE 1. WATCH THE ONBOARD TUTORIAL

The BladderScan i10 system includes an onboard tutorial with instructions on how to scan and manage
exams. It is recommended that you watch the tutorial before using the system. The tutorial does not include
an audio track.

Note: The setting and configuration screens include access to screen‑specific help text. To see help text on
any setting or configuration screen, tap

Help

1. Tap the appropriate button on the screen that is currently displayed. The Tutorial Control screen opens

and the tutorial begins to play.

On…

Tap…

The tutorial starts at…

The Home screen

Tutorial

The beginning

The Results screen

Help

The section on viewing and saving results

The Saved Exams screen

Help

The section on reviewing saved exams

While the tutorial is playing, you can take these actions:
• View the previous frame of the tutorial (tap

)

• View the next frame of the tutorial (tap

)

• Pause the tutorial (tap

Pause

) or continue the tutorial when paused (tap

Play

)

• When you are done viewing the tutorial, tap

Exit

CUSTOMER SERVICES RESOURCES

Verathon provides several customer service resources, as described in Table 13.

Table 13. Customer Service Resources for BladderScan i10 Systems

RESOURCE

DESCRIPTION

In‑service USB

USB drive included with your system that includes instructions on using it.

Onboard help tutorial

A training module installed on your BladderScan is available by pressing

Help

from the Home, Aiming, and Results screens.

Onboard help text

Screen‑specific online help text is available by pressing

Help

from the setting

and configuration screens.

Phone support

Refer to the list of Verathon Customer Care resources available at

verathon.com/global‑support

Summary of Contents for BladderScan i10

































































































Search results

Summary of Contents for BladderScan i10

Reviews:

Related manuals for BladderScan i10

Brands by name

Popular brands

Verathon BladderScan i10, Operation & Maintenance Manual

Search results

Summary of Contents for BladderScan i10

Reviews:

Related manuals for BladderScan i10

Brands by name

Popular brands