Verathon BladderScan i10, Operation & Maintenance Manual

Page: 14 / 96

6
0900‑5005 REV‑00
To maintain electrical safety, if you are using the accessory battery charger, inspect the charger
for damage before each use. Do not use a battery charger with cracks or other damage. If the
battery charger is damaged, contact Verathon Customer Care or your local representative.
WARNING
If the battery is overheating or drawing excessive current, turn the system off and disconnect
external power immediately. Allowing overheating or excess current draw to continue can
start a fire or cause an electrical injury. For help with battery malfunctions, contact Verathon
Customer Care.
WARNING
No modification of this equipment is allowed.
WARNING
To avoid the risk of injury, when the printer door is open:
• Do not touch the printer mechanism or print head, which may be hot from recent printing.
• Do not touch the edge of the paper cutter.
WARNING
Never use the BladderScan i10 system to display the image of anatomical features other than the
bladder.
WARNING
This system is intended as a measuring tool only. It is not a diagnostic device.
WARNING
Use only a passive‑type USB flash drive. Do not use USB drives powered by another external
source.
WARNING