VENT
125 Baja + Baja RR /
VENT
125 De Derapage RR
25
OFF
OFF
OFF
1
2
N
1
2
3
4
5
6
3
4
use and maintenance manual
WARNING
Change gears one at a time; stepping up
several gears at once may cause the en-
gine to exceed its maximum power and
to overrev.
Before and during the “scaling up” from
one gear to another, always slow down,
releasing the accelerator to avoid over-
revving.
Stopping the vehicle
- Release the accelerator knob (1), grad-
ually activate the brakes and simultane-
ously “scale down” the gears to reduce
the speed.
- Pull the clutch lever (2) before fully stop-
ping the vehicle, to keep the engine from
turning off.
- Place the gear lever (3) in its neutral po-
sition.
- Release the clutch lever (2).
- During a temporary stop, keep at least
one of the brakes activated.
Stopping the engine
- Stop the vehicle as indicated previously.
- Rotate the key (4) to the OFF position
“
” and remove it.
- Park the vehicle on its side kickstand as
described in its relative paragraph.
MAINTENANCE
DANGER
Danger of fire or toxic fumes.
Never place flammable substances
(such as fuel, cooling fluid, solvents etc)
near the electric parts.
Always wear suitable garments (work-
ing overalls) and working gloves, latex
gloves, protective goggles (or mask)
when doing the necessary maintenance
operations on the vehicle.
Preliminary operations
Before starting maintenance operations:
- Turn off the engine;
- Wait until all overheated parts of the ve-
hicle (engine, silencer etc) are down to
room temperature;
- Make sure the place has suitable ventila-
tion and air circulation;
- Check the maintenance area (it must
not be dusty, dirty or occupied with other
components not involved in the opera-
tions or the vehicle);
- Make sure you have all the tools and
pieces of equipment you need for the
maintenance operations you must carry
out;
- Always wear suitable garments (work-
ing overalls) and working gloves, latex
gloves, protective goggles (or mask)
when doing the necessary maintenance
operations on the vehicle;
