VENT
125 Baja + Baja RR /
VENT
125 De Derapage RR
32
1
2
A
B
4
3
2
1
use and maintenance manual
Disassembling the front light holder
- Park the vehicle on its kickstand.
Removing the lamp bracket Model Baja
- Unscrew and remove the screw (1). Repeat
the operation on the other side of the vehicle.
- Remove the lamp bracket (2) “A” and lift it
“B” to unhook it from the seats (3) of the front
mudguard.
WARNING
The lamp bracket, complete with front
headlight, remains connected to the
electric cables.
DO NOT FORCE THE ELECTRIC CABLES.
- Disconnect the electric connector (4)
from the light cable.
NOTE: Place the lamp bracket on a clean,
soft cloth on a support surface, to avoid
damage to the bracket.
- Re-mount everything, proceeding in the
opposite order to disassembly.
Removing the lamp bracket Model
Derapage
- Unscrew and remove the screws (1). Repeat
the operation on the other side of the vehicle.
- Remove the lamp bracket (2) from the support.
WARNING
The lamp bracket, complete with front
headlight, remains connected to the
electric cables.
DO NOT FORCE THE ELECTRIC CABLES.
- Disconnect the electric connector from
the light cable.
NOTE: Place the lamp bracket on a clean,
soft cloth on a support surface, to avoid
damage to the bracket.
- Re-mount everything, proceeding in the
opposite order to disassembly.
