VENT
125 Baja + Baja RR /
VENT
125 De Derapage RR
51
4
5
6
5
2
6
B
B
A
use and maintenance manual
Low beam/high beam light bulb
WARNING
To remove the electric connector, do not
tug on the power cables.
Disassembly
- Slide out the protection casing (4) of the
light bracket (5).
- Unhook the locking clip (6) of the light
bracket.
- Slide out the light bracket (5) from the
parabolic seat.
- Press the light bulb (2) with moderate
strength and turn it counter-clockwise.
- Remove the light bulb (2) from its seat.
Reassembly
- Insert the light bulb in its socket, making
sure the two guiding pins match their
guides in the socket.
- Insert, press and rotate the bulb (2)
clockwise.
- Insert the light bracket (5) in the parabol-
ic seat, making sure (A) and the tip (B) of
the locking clip (6) are in the same posi-
tion.
- Properly hook the locking clip (6) to the
light bracket.
- Slide the casing (4) properly.
- Reassemble the front headlight.
Rear headlight bulb
The rear headlight unit is LED. If it is not
working, the entire headlight unit must be
replaced. For this replacement, contact a
VENT
Dealer.
Front and rear blinkers
The blinkers are powered by LED. If it is not
working, the entire headlight unit must be
replaced. For this replacement, contact a
VENT
Dealer.
TRANSPORTATION
DANGER
In the event of a breakdown, do not tow
the vehicle yourself. Request a profes-
sional towing service.
WARNING
Before loading, remove or anchor to the
transportation surface (of the cart or
van) all objects that may be displaced
during transportation and crash against
the vehicle, therefore damaging it.
NOTE: The height of the transportation sur-
face (of the cart or van) requires the use
of a slide that allows for the loading of the
vehicle. The size, material and rigidity of
the slide must be sufficient to support the
weight of the vehicle during loading.
