INSTALLATION GUIDE
16
REVISION™ Door for National 157/167 - 158/168
INSTALL REVISION DOOR
Next, fasten
Coin Chute (VE1015284)
to OEM cash box
housing.
Then, insert (3) standoffs removed from previous interface
board mounting holes as shown.
NOTE:
Can also be installed
directly onto power supply board.
Next, position and mount the
Power Supply Board
(VE5815)
onto the standoffs as shown.
Next, connect the power cable from the
Cabinet Harness
(VE1015729)
to power supply board as shown.
Then, fasten machine screw set aside from previous step to
the upper left stud on power supply mounting plate.
If note above is true, from inside cabinet, remove cover from
main power supply
5
7
9
10
6
8
SECTION 2. DOOR COMPONENTS (continued)
NOTE:
If OEM power supply
DOES NOT
include harness to
connect with new power supply,
follow steps 10–15.
(Continued next page)
REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSING
INS
TALL BUCKET
DROP SENSOR
ADJUS
T DOOR
Inside Front of
Cabinet
Position as
shown towards
top of cabinet
Inside Front of
Cabinet
Coin Chute
Cash Box
Stand-Offs
Fasten Screw
Power Supply
Power Supply
Cabinet Harness
Cabinet Harness
Power Supply
Cover
