INSTALLATION GUIDE
12
REMOVE OEM DOOR AND PARTS
REVISION™ Door for National 157/167 - 158/168
Disconnect door switch harness from door
switch as shown.
Open swing panel and unfasten flat head screw from the display board
cover. Then, remove top ribbon cable only and metal strap.
Loosen nuts in (6) places from swing panel, then remove the
swing panel from the cabinet.
Loosen 1/4” screws and remove the bracket from right side of
the cabinet.
12
13
11
10
(Continued next page)
REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSING
INS
TALL BUCKET
DROP SENSOR
ADJUS
T DOOR
Door Switch
Display Board
Cover
Display Board
Swing Panel
Top Ribbon
Cable
Screw
Screws (6)
Screws (3)
Screws (3)
Screws (3)
Bracket
Harness
