INSTALLATION GUIDE
21
REVISION™ Door for National 157/167 - 158/168
INSTALL VEND BUCKET
Next, from under the VEND BUCKET, connect existing gum and mint motor to
gum and mint harness. For OEM gum and mint harness with 7-pin connector,
refer to step 6 below.
Then, if VE 7th Tray™ is used, plug extender
into VE 7th Tray motor harness.
Next, if the OEM gum and mint has a 7-pin flat connector,
attach gum and mint adapter as shown.
Finally, when attaching to an OEM gum and mint harness,
ensure that the connector pin tabs
(see image)
are oriented in
the same direction as shown. Use cable tie to secure harness-
es together.
4
5
6
7
REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSING
INS
TALL BUCKET
DROP SENSOR
ADJUS
T DOOR
1
1
7
7
Pin Position
Call-outs
OEM Gum and
Mint Harness
Gum and Mint
Motor
Gum and Mint
Harness
7th Tray Extender
7th Tray Motor Harness
OEM Gum and
Mint Harness
Gum and Mint
Adapter
THIS SECTION IS COMPLETE, THE
MOVE ON TO INSTALLING DROP
SENSOR
