Instruction for installation,
maintenance technician
and final user.
VENDING MACHINE
Rev. 00
Models: VDI 100 – 189 – 217 - 254
Pag. 29 di 46
4.2
Final check
1-
Completely load the column
2-
Make several selection, check the reloading and the delivery of the product
For some product format the column needs spacers or other special kits: in this case contact SandenVendo
or the authorized service centres for the correct set up.
If it is necessary you can send you product to the company: the necessary test will be carried out to obtain
the exact adjustment.
USUAL PRODUCTS ARE NORMALLY TESTED AT OUR FACTORY. ASK FOR THE SET NUMBER OF THE PRODUCT YOU
WISH TO SELL AND REFER TO THIS NUMBER WHEN ORDERING. WE WILL MANUFACTURE THE VENDING MACHINE
ACCORDING TO YOUR SPECIFICATIONS
4.3
Control settings
All the machine’ s control and operation settings can be set through the programming routine of the
electronic board.
The programming routine of the electronic board is described in the PROGRAMMING MANUAL supplied
with the vending machine.
i
REFER TO THE PROGRAMMING MANUAL
4.4
Start up
To start up the vending machine work as follows:
•
Make sure the plug is connected with the supply mains;
•
Power the vending machine: press the luminous green MAIN SWITCH pushbutton (ref. Fig. 5.13)
situated on the transformer box inside the machine (lower left hand side);
•
Switch on the neon lamps: press the luminous green LIGHT SWITCH pushbuttons (ref. fig. 5.13)
situated on the inner side of the door;
•
Execute the programming routine: refer to the Programming Manual;
•
Load the vending machine with the product desired;
•
Close the door of the vending machine and wait for the general machine check;
•
The vending machine is now ready for use.