Instruction for installation,
maintenance technician
and final user.
VENDING MACHINE
Rev. 00
Models: VDI 100 – 189 – 217 - 254
Pag. 24 di 46
FIG.5.8
竡
VEND MOTOR
4)
Disconnect power to the vending machine
5)
Loosing the two mounting screws (E) of the cam cover (F) and turn it as much as possible counter
clockwise to convert from 2D to 1D (ref. Fig 5.9) or clockwise to convert from 1D to 2D tighten
screws again.
FIG.5.9
竡
CAM
6)
Remove the delivery chute to get better access to the lower area of vend mechanism
7)
Remove the plastic wedge (G) that is installed on the lower bail rod (I) if you have to convert from 2D
to 1D. Install the wedge in the proper hole if you have to convert from 1D to 2D (rif. Fig. 5.10).
