Instruction for installation,
maintenance technician
and final user.
VENDING MACHINE
Rev. 00
Models: VDI 100 – 189 – 217 - 254
Pag. 17 di 46
Make sure
that the particulars of the power mains (tension and frequency) are the same as those
indicated on the machine’ s rating plate: this vending machine must be connected to a 230 V , 50
Hz power mains, each voltage below 207 V or over 253 V can causes failure.
Make sure
that the supply outlet is grounded and that, after making the connection, the entire
appliance is ground connected.
Make sure
that the appliance is positioned so that the plug connecting it to the power mains can
be easily accessed after installation.
Make sure
that the neutral wire is blue; otherwise, you must invert the poles.
CAUTION: should you find any anomalies with the supply cable or should it be damaged, it must
be replaced. For the safety of personnel and to prevent all risks of damages to the machine never
replace the supply cable, contact the manufacturer or the technical assistance service.
CAUTION: NEVER USE EXTENSION LEADS
You may now connect the machine to the power mains, the neon advertising panel and all the signal lamps
of the empty columns should light up and the cooling system should start.
