Instruction for installation,
maintenance technician
and final user.
VENDING MACHINE
Rev. 00
Models: VDI 100 – 189 – 217 - 254
Pag. 26 di 46
FIG.5.11
竡
Thicker shims must always be installed first.
For those products whose diameter is far from the range, which the vender can vend with standard shims
supplied with, you need to install special kits. Installation instructions are attached to any kit supplied by the
factory.
Measure the length of a row of product, add 10 mm and move back spacers (P) to the back to get desired
distance between backs pacer and partition front flange, then load first product on the lowering shelf which is
in “ up” position.
Place the product on the shelf (R) as far forward as possible and, if the column is adjusted for 2D place the
second of the row directly behind it. At this time there must not be any product on the bail (I) (rif. Fig. 5.12).
