Instruction for installation,
maintenance technician
and final user.
VENDING MACHINE
Rev. 00
Models: VDI 100 – 189 – 217 - 254
Pag. 35 di 46
5.6
General cleaning operation
In order that the machine is in perfect working condition, it is important that it is clean and well kept.
Please follow the instructions below:
Cleaning painted
areas and removing
small scratches
Clean the vending machine with soap and water. Any good car wax
can be applied to the exterior surfaces of the vending machine.
Small sign of corrosion can be removed using fine sand paper and
covering over the surfaces with nitrocellulose lacquer
Paint splashes and grease or glue marks can be removed using
solvent.
Cleaning the neon
advertising board.
The neon-advertising panel should be cleaned with care. It is
advisable to follow these directions:
•
Wash with neutral soaps or detergents in warm water
•
Use soft cloths or sponges.
•
Do not rub harshly
•
Rinse with warm water
•
Dry with cotton rags or synthetic skin cloths
•
CAUTION: almost all the organic solvent fuel oils, kerosene or
alcohol will corrode the panel material. If used the panel will be
permanently damaged
Cooling area
The condenser and the evaporator should be kept clean and in
working order. You must check that all openings and the pipes are
clean and there is nothing obstructing the passage of air.
Product delivery
chute
Check that the product delivery chute is clean and without any deposit
Cleaning the
drainage tube
Check that there are any obstructions in the drainage tube
Crown box
Periodically empty the crown box (when used)
