Instruction for installation,
maintenance technician
and final user.
VENDING MACHINE
Rev. 00
Models: VDI 100 – 189 – 217 - 254
Pag. 23 di 46
SANDENVENDO RESERVES THE RIGHT TO APPROVE THE VEND OF ALL PRODUCTS
WHICH ARE NOT PERFECTLY CYLINDRICAL ONLY AFTER TESTING THEM
MOREOVER SANDENVENDO IS NOT RESPONSIBLE FOR USES AND APPLICATIONS OF
THE VENDER, WHICH ARE NOT EXPLAINED IN THIS MANUAL.
4.1.2
LOADING
This mechanism can vend some packages stacked in double depth (2D column) (ref. Fig 5.7) and other in
single depth (1D column) (ref. Fig 57)
2D
1D
FIG.5.7
竡
EXAMPLE OF CHARGING
4.1.3
Conversion from 1D to 2D and from 2D to 1D
If conversions are necessary, refer to the instructions below:
1)
Remove the mechanism cover
2)
Power the vending machine
3)
Enter the board-programming mode (refer to the programming manual), using “ Test” function,
start the motor of the column to be converted. This will cause the rotation of the cam, which will be
rotated until the link assembly (C) connected to the cam (D) will be in its lower position showing the
two mounting screws (E) the cam cover (rif. Fig. 5.8).
