EN
-26-
Device Installation
Close the water supply line before installation. The electrical
connection must be disconnected from the power supply. Dismantle
or close the fuses.
The legal requirements must be adhered to the connection conditions of
the electricity and water distribution facilities and the specifications and
technical values stated on the device.
Installation Location:
The above figure should be taken into consideration for correct positioning
of the device.
For installation, there must be approximately 60 mm of free space around
each side of the device.
The device should be installed vertically so that it will not come into direct
contact with water.
The distance between the device and the tap must be as short as
possible to prevent heat losses.
