RF Input:
"F" Connector, 75 ohms for connection to the CATV network. This connector provides access to the Signal Level
Meter (SLM) and associated functions including Tilt, Ingress and System Scan measurements. Reverse Path QAM analysis
(CX180 only) is also performed on this test port.
Note: Maximum Voltage input is 100VAC, 140VDC
Auxiliary:
This connector provides access to the DOCSIS cable modem and Upstream Generator functions where
applicable.
Utility Ports:
To access the utility ports, remove the protective rubber cover on the right hand side of the unit to expose the connectors;
CX100/110/120/150/180 series e-Manual D07-00-002 Rev B01
Page 7 of 39
