The IP functions are similar to the ones describes on the following section IP Tools. Please note that ARPWiz is not supported on
the Cable Modem interface. Go to the common functions manual for more details.
The Pass Through function provides the ability to emulate a real cable modem. Once the cable modem is online, select the pass
through tab, then connect the customer network (LAN, PC,...) to the management port on the right side of the unit (10/100T port).
The traffic will pass through and the unit will act like a real cable modem.
CX100/110/120/150/180 series e-Manual D07-00-002 Rev B01
Page 31 of 39
