The following measurements are performed for each digital channel:
QAM Power Level in dBmV
MER in dB
Max Adjacent Channel Delta in dB
The following measurements are calculated based on the results of all 6 digital channels:
Tilt in dB
Peak-to-Valley in dB
Min QAM Level in dBmV
Max QAM Level in dBmV
Max Delta Adjacent Channels in dB
The user can select to either perform Analog channels only, Digital channels only or both. During the test, a status indicator is
displayed as well as the current progression. Once completed, the yellow square is replaced by a green square if the
measurements meet the location based thresholds or a red square if the measurements fail to meet the location based thresholds.
Once the measurements are completed the user can display details information about each channel by tapping on the magnifying
glass at the right bottom of the summary screen.
CX100/110/120/150/180 series e-Manual D07-00-002 Rev B01
Page 34 of 39
