The channel is changed by using the up and down arrow. Each occurrence will increase or decrease the channel value by one.
The user can quickly jump in the channel table by tapping on the channel number area or by pressing enter. The center frequency
of a channel can also be edited by tapping on the frequency area.
The following measurement information is provided for analog signals:
Video Power Level (graphic bar and numeric in dBmV)
Audio1 Power Level (graphic bar and numeric in dBmV)
V/A1 Ratio (numeric in dB)
Audio2 Power Level (graphic bar and numeric in dBmV)
Video/Audio2 Delta (numeric in dB)
Carrier to Noise or C/N (numeric in dB) - note the affect of poor C/N on analog video carriers below.
Max Adjacent Channel Delta (graphic bar and numeric in dB)
CX100/110/120/150/180 series e-Manual D07-00-002 Rev B01
Page 12 of 39
