1
Introduction
This manual describes setup and operating procedures for the EMR
3
Electronic Meter Register System. This
manual assumes that the Display Head, Interconnection Box, and printer are installed and connected.
System Options
There are three options available for the EMR
3
System:
•
Time and Date
•
Currency Mode
•
Temperature Compensation
References to Time and Date, Currency/Pricing, and Temperature Compensation are found throughout this manual
in setup charts and in operating instructions. The EMR will not display any setup steps connected to an option (in
Setup or C&C Modes) if that option is not installed. When using this manual, please ignore any references to an
option if it is not installed.
System Setup
There are two distinct categories of EMR
3
setup; Setup Mode which can be accessed at any time by the
equipment operator, and C&C (Configuration and Calibration) Mode which is only to be entered in accordance
with Weights and Measures (W&M) requirements.
SETUP MODE
The Setup Mode can be accessed by the equipment operator to:
•
Establish price, tax, and discount codes,
•
Set the shutoff points for preset flow control relays 1 and 2.
•
View/print delivery records,
•
Select a designated printer type,
•
Set system component addresses,
•
Set time delays to blank out display,
•
Enter shift times, tanker reloads, and odometer readings, and print out end-of-shift activity reports,
•
Enter security codes which can be assigned to delivery functions to prevent unauthorized changes.
•
Provide Passcode login procedure for access to assigned setup categories.
•
Restore up to the last 50 transaction records from IB NVRAM storage to a replacement Display Head,
•
Select month, day, year date formats,
•
Enter system Time and Date, and
•
View component version numbers.
C&C MODE
The C&C Mode setups must be performed before you make selections in the non-metrological controlled Setup
Mode -
There is one exception:
When initially powering up an EMR
3
System with two Display Heads, System
Address Setup (in Setup Mode) must be completed before entering C&C Mode (see page 24 to page 27).
